Compressor Booster

Compressor Booster:
In order to produce PET bottles and similar products - which require 40 working pressures - Flex PET system is used to save costs and reduce the cost of compressed air pressure.
In this system, the compressors produce 10 times the compression, and after the filtration and storage steps (as shown below), the air produced is entered into the compressor booster system.
The boost function is to increase the pressure from 10 times to 40 times.
40-fold high-volume air-to-high-conduction pressure reservoir and ready-to-use filtration operation for PET or other devices.
Users are 40 times loaded.

Advantages of the booster system:

With the combined advantages of a screw system, the advantages of a screw can be achieved by combining these two piston compressors.
The cost of maintenance of high-pressure compressors is relatively high due to the reliability factor and the use of specific technology, which is much lower in the boosters.
In this system, you will have two normal pressures (10 times) and a high pressure (40 times).
The booster system occupies less volume.
The booster system can produce high voltages at high pressure, which can not be achieved by single-pressure compressors.

The booster system consumes less energy and has higher efficiency.

For more information, visit the company website at:

http://www.behsanair.com
http://www.behsanline.com